 |
|
click here to enlarge pic | 1711 - Gen-X 10 235mm Expansion Kit
SKU: 1711
235mm Expansion Kit for the Gen-X 10
|
|
Team
CRC has done it again! We've taken the most adjustable and adaptable
10th scale 200mm pan car on the market and raised the bar one step
further. Gen-X 10 drivers can now harness the power of brushless motors
and LiPo batteries with the greatest of ease on those big, fast asphalt
tracks thanks to the 235mm Expansion Kit for the Gen-X 10.
|
| | | |
|
|
|
Additional Information
|
|
|
These lightweight hub extensions key into the hubs for a precision, "wobble
free" fit every time. They also have a locating ring for the wheel to center
on. |
As you can see in the photo above, the design of the hub extensions allow
for easy access to not only the hub mounting bolts, but there is ample space
for your diff wrench as well. |
|
|
Each hub extension is 15mm wide, bringing your stock 200mm Gen-X 10 out to
230mm. This allows the driver to tune the rear track width with shims to get
just the right width for the body of your choice.
Here at the shop, we have actually added a couple of 3mm diff spacers
(p/n 4121) and a few shims (p/n 4732) and got the rear width out to 240mm! |
Accepts
just about any 10th scale wide body made!
The
Gen-X 10 235mm Expansion Kit has so much adjustability that you can
fit any of the numerous different body sizes out there.
|
|
 |
|
|
|
The wide front end plates included in the Gen-X 10 Expansion Kit feature two
sets of front end holes. The inner set is for most of the popular 1/10 pan
car GTP bodies that taper in at the front such as the 905B from Protoform.
The outer set is for wider "nitro car" bodies such as the 235mm Lola from
Parma. The wide front end plates also have multiple sets of holes for track
width and wheel base adjustment, similar to the adjustments on the stock
plates. |
| |
|
|
P/N 1711 - Gen-X 10 235mm Expansion Kit - Retail $49.99 - Barcode
800734017110 |
|
|
|
|  |
