 |
|
| 7700 - Short Course Conversion for Losi XXX-T trucks (w/ bumpers)
SKU: 7700
List Price: $84.99
Replacement Parts for the 7700 and 7701 XXX-SCT Conversion Kits
| 1209 |
Servo Mount Washer (10) |
| 1376 |
3/8 x 4-40 Cap Head Scrw |
| 1378 |
Body Post Set-for CK V3 |
| 1381 |
1/4 x 4-40 Cap Head Scrw |
| 1388 |
Aluminum Locknuts (4) |
| 1428 |
3/8 x 4-40 FH Allen-SS (4) |
| 1444 |
5/8 x 4-40 SS Cap Head (6) |
| 7711 |
Bottom Plate Extensions (L&R) - XXX-SCT |
| 7712 |
Bottom Cover Plate - XXX-SCT |
| 7713 |
Bottom Plate Mnt Pcs - XXX-SCT (2) |
| 7715 |
Rear Top Plate/Shock Twr Mnt - XXX-SCT |
| 7717 |
Front Body Mount Plate - XXX-SCT |
| 7721 |
Steel Front Axles (2) - XXXSCT |
| 7725 |
Foam Battery Blocks (3) - XXX-SCT |
| 7728 |
4in. Body Post w/ Collars (pr) |
| 7737 |
7/8" Silver Hex Standoff (2) |
| 13742 |
1/2" x 4-40 Phillips UC Flat Screw (4) |
***XXX-T CR owners - look below. These are the parts you will need to get rid of the quick change rear hubs.
If your truck does not have the quick change rear hubs and still holds the rear wheels on with a locknut, then you do not need these parts!***
Parts needed to complete the conversion for the XXX-T CR:
LOSA3015 (axle) x2
LOSA3090 (dogbone) x2
LOSA3027 (universal pivots) x1
LOSA2129 (rear hub carriers) x1
LOSA9941 (rear axle spacers) x1
CRC 701661 (3/16" x 3/8" bearings - 10 pack)
***The list above is for XXX-T CR owners ONLY. MF2 and older already comes with everything you need! (other than tires and body of course)***
The LOSI parts can be purchased through your Local Hobby Shop, or through www.horizonhobby.com or www.losi.com
| | | |
|
|
|
Additional Information
ATTENTION - Carbon Fiber parts pictured look slightly different than what will be included in the kit you receive. The parts pictured below were prototype parts. They have since been slightly modified for better fitment and ease of building / installation.
Team
CRC Short Course Conversion Kit for XXX-T based trucks
#7700 and #7701
Move over you other LCG Short Course Trucks, the dominant Losi XXX-T platform
has just entered the SC category as well, (with a little help from Team CRC!).
What else can we say about this truck that Team Losi hasn't already proven on
the race track over the last decade or so. The truck handles extremely well and
has excellent durability too. It's light, nimble, and has always been class
leading in chassis, suspension, and tuning feature innovation.
Now you can pull those XXX-T's off the shelf that you sidelined when the Short
Course craze started, and convert them into the baddest SC Truck on the track.
This set converts most all XXX-T truck kits from Team Losi, including the Desert
Truck (pictured here) & XXX-T CR
utilizing carbon fiber chassis extensions that allow you to use your stock rear
bottom plate. Using the stock rear bottom plate makes converting any XXX-T a
breeze because there will be no complications with the rear arm mounts,
transmissions, etc not matching up. RTR's, MF 1's, MF 2's, Desert Trucks, and
the newest XXX-T CR's can all be converted using this setup.
(the CR will require you to replace the quick change hubs and axles over to
standard type axles).
The conversion does require you to drill two small 4-40 size holes in the front
bulkhead, but this is very easy to do, and a drill bit is even included in the
kit so you don't have to track one down. As you can see in the pictures below, the
front bulkhead is already pre-marked! All you have to do is drill a hole in the
center of each mold mark, and BAM...the front body mount is on.
ETA 6/7
| Part# |
Description |
Barcode |
Retail |
MAP |
| |
|
|
|
|
|
7700 |
SC conversion for XXX-T
trucks (w/ bumpers) |
800734077008 |
$84.99 |
$69.99 |
|
7701 |
SC conversion for Desert Truck
(no bumpers) |
800734077015 |
$54.99 |
$44.99 |
As you can see in the pic above, you can trim out the plastic backstop in the
XXX-T chassis, giving you the most front to back battery adjustment of any SCT.
(just don't cut the whole bridge out or you won't have anywhere for your battery
strap to attach to).
Meets all ROAR rules for SC truck dimensions. Body and Tires NOT included. Uses
SC10 style wheels from any of the popular wheel manufacturers, or you can also
add the hex adapters from the Losi Strike and use Strike wheels!
|
|
|
|  |
